You need Java to see this applet.
Vise +
Incredibly easy to set up, a Vise can be
mounted nearly anywhere in seconds: on a
workbench, picnic table, truck tailgate,
plywood sheet, steel beam, or any other
surface up to 2-3/4” thick. Powerful, precisely
machined jaws hold your work firmly and
securely with minimal clamping pressure,
which is easily applied using the ergonomic
handle. After tightening, the handle can be
instantly released into an "at-rest” hanging
position to avoid interfering with your work.

 
New Owners Parts Page
Replacement Parts, Add-Ons, Easy Ordering
The unique z-Vise2 jaws have two clamping surfaces: one near the table edge and one approximately
five-and-one-quarter inches off (above or below) the table.
Flip the vise upside-down to create an even more unusual and highly valuable setup for flat work.
Ever Need A 3rd Pair of HandsTo Hold IT, Grip IT, Clamp IT, Secure IT

                                                                                                                                            
                                                                                       LIFETIME WARRANTY
SWISS DESIGNED AND ENGINEERED
Vise BODY : Basic Vise body including handle, fixed jaw, guide bars.  
Manufactured to precise specifications out of high carbon cold rolled steel, zinc
plated for a lifetime of rust and corrosion free operation.
Standard Components
QUICK RELEASE JAW : Instead of cranking your vise endlessly every time you
have a different workpiece size, this feature lets you slide the movable jaw
instantly along the entire length of the vise.
I-Beam Bench CLAMPS : The heart of the ingenious Vise design, these clamps
hold your vise to practically any surface. Workbench, truck tailgate, a sheet of
plywood, picnic table, deck railing. Also can be used separately as regular
c-clamps to immobilize round and irregular shapes.
Vise END STOP : The unique Vise end stop may be mounted anywhere to provide
a third clamping surface, creating a virtually unlimited clamping capacity.
Vise CUP CENTERS : These cleverly designed holders slip easily into position on
the jaws of your Vise and are used for holding pieces that need to be rotated while
being worked on.
Vise DRILL HOLDER : This handy accessory slips into place on the guidebars of
your z-Vise and can hold most portable drills with a 43 mm or 1-5/8" collet
Vise TURNTABLE : This ingenious work platform is used to position your Z-Vise
at any angle needed for convenient access to your work....
TUBE CLAMPING JAWS : These novel accessories give your z-Vise the
ability to hold round stock at any angle. Instantly slipped into place over the
standard vise jaws,...
METAL JAW COVERS : The metal covers are set over the large clamping faces
of the jaws to protect from the damage otherwise caused by metal or other hard
objects being held.
LOWER PLASTIC JAWS : These perform the same function as the upper soft
jaws supplied with the basic vise, except that they cover the bottom part of the
clamp instead of the top....
Vise Transport Case : Super-convenient, durable,
one-piece carrying case has a spot for every
component of your vise including the accessory kit.
HOW MUCH... HOW DO I BUY
Zyliss TORNO Mini Lathe         
Using the same portable clamping system as the Vise, this handy tool lets you create
beautiful and valuable turnings almost anywhere, powered by your drill. Your TORNO
includes a sturdy mainframe, toolrest, turning center, and live center. Fits stock up to 22"
long and 7-1/2" in diameter.

Swiss Manufactured with a Lifetime Warranty this is a wonderful addition.
Here's Another Great Product From MYHOMEWORKSHOP
COME SEE A ZYLISS IN ACTION
CLICK TO SEE WHERE YOU
CAN WATCH A Z_VISE IN
ACTION
Search Engine Submission and Optimization
HOW DO I BUY
Z-Vise Accessory Kit
Includes everything shown below:
Really good, not a
gimmick, Swiss
quality, ergonomic
engineering June 18,
2009 The first
Z-vise I bought in
'79 cost less than
one hundred bucks,
and I thought that
was pricey at the
time. After I got it, I
realized what a great
tool it is. Worth
every penny.

Rich,
Puyallup, WA.
The Zyliss Vise is
as others have
mentioned a truly
fine vise. Mine first
one was purchased
at a home and
garden show in
Denver at least
thirty years ago. I
bought a second
about three years
ago. I wouldn't
trade either of them.

Jim P. Virginia
Swiss Designed - Swiss Engineered  
Offered Exclusively by MyHomeWorkshop.com
OWNERS...Need Replacement Parts or Upgrades for Your Z-Vise 2, GripMaster, Vise Master, Original Zyliss Vise?
Click Here for a Complete Parts List,  Pricing and Ordering Page
VISE OWNER PAGE... CLICK HERE
myhomeworkshop@myhomeworkshop.com-1998-2009 All Rights Reserved
                 My  Home Workshop    
                                                             Your Link to Home Improvement, Do It Yourself, How To, Tricks, Tips, Techniques, and Tools
                                                                               
Z-Vise, Zyliss Mini, Master Vise, Alpha Clamp
Lowest Price
on New
Waranted
Systems
Z-Vise | Multi-tools | Zyliss Lathe | Pink Tool Kit | Crafters Kit | Country Pink Tools | Stadium Seats | Vise Parts | JackClamp | ToolGlide

About Us | Contact Us | Ask Bo | Warranties & Guarantees